You are here: Home » Hi-Strength -Textured Finish
0 items in your wish list

Hi-Strength -Textured Finish

 

 

HSS10 110 x 100mm

  100
110
 

 

Length (mm) CODE Wish List
900HSS 10090
    
1050HSS 10105
    
1200HSS 10120
    
1350HSS 10135
    
1500HSS 10150
    
1650HSS 10165
    
1800HSS 10180
    
2100HSS 10210
    
2400HSS 10240
    
2700HSS 10270
    
3000HSS 10300
    
3300HSS 10330
    
3600HSS 10360
    
4200HSS 10420
    

HSR15 140 x 100mm

  100
140
 

 

Length (mm) CODE Wish List
900HSR 15090
    
1050HSR 15105
    
1200HSR 15120
    
1350HSR 15135
    
1500HSR 15150
    
1650HSR 15165
    
1800HSR 15180
    
2100HSR 15210
    
2400HSR 15240
    
2700HSR 15270
    
3000HSR 15300
    
3300HSR 15330
    
3600HSR 15360
    
4200HSR 15420
    

HSS15 150 x 140mm

  140
150
 

 

Length (mm) CODE Wish List
900HSS 15090
    
1050HSS 15105
    
1200HSS 15120
    
1350HSS 15135
    
1500HSS 15150
    
1650HSS 15165
    
1800HSS 15180
    
2100HSS 15210
    
2400HSS 15240
    
2700HSS 15270
    
3000HSS 15300
    
3300HSS 15330
    
3600HSS 15360
    
4200HSS 15420
    

These lintels are not universal and must be used in the correct orientation.

 

 

HSR22 215 x 100mm

  100
215
 

 

Length (mm) CODE Wish List
900HSR 22090
    
1050HSR 22105
    
1200HSR 22120
    
1350HSR 22135
    
1500HSR 22150
    
1650HSR 22165
    
1800HSR 22180
    
2100HSR 22210
    
2400HSR 22240
    
2700HSR 22270
    
3000HSR 22300
    
3300HSR 22330
    
3600HSR 22360
    
4200HSR 22420
    

HSR21 215 x 140mm

  140
215
 

 

 

Length (mm) CODE Wish List
900HSR 21090
    
1050HSR 21105
    
1200HSR 21120
    
1350HSR 21135
    
1500HSR 21150
    
1650HSR 21165
    
1800HSR 21180
    
2100HSR 21210
    
2400HSR 21240
    
2700HSR 21270
    
3000HSR 21300
    
3300HSR 21330
    
3600HSR 21360
    
4200HSR 21420
    

Installation 

  • Ensure the lintel is not damaged. 
  • The lintel should be installed with a minimum end bearing of 150mm. 
  • Ensure the lintel is used in its correct orientation and is fully bedded in a level position on mortar across its length and width. 
  • The masonry below the lintel should be built in accordance with EN 1996-1-1. 
  • Where required in external walls a flexible damp proof course or cavity tray shall be installed in accordance with current building regulations. 
  • If required rendering of the lintel is not deemed to be detrimental to its performance.
  • Do not cut into the lintel to form rebates or modify in any way , if in doubt please contact our technical department.
 
Load/Span Table

 

Stockist become a stockist envionment quality